Triumph Herald 948 + 1200 disc brake conversion - part 511045 fitting instructions
I have recently been sent a scanned copy of - Triumph Herald 948 + 1200 disc brake conversion - part 511045 fitting instructions. Here is start from the booklet. The booklet was originally published by Standard Triumph and was scanned by Paul Cattrell.
DISC BRAKE CONVERSION KITThe whole document is available to view and download from my box.com account at: https://app.box.com/s/zirocqe8bkutddf4qe5qkmpu3jkjddix
FITTING INSTRUCTIONS
PRELIMINARIES
Disconnect the battery, jack up the car and place supporting stands under the chassis frame. Remove
all road wheels.
Attach a length of rubber tubing to one of the front brake bleed nipples and suspend the opposite
end of the tube in a clean container.
Unscrew one front bleed nipple one turn and by operating the brake pedal, pump the hydraulic system
dry.
Front Brake Assemblies
Disconnect and remove both bundy pipes which connect the flexible hoses to the 5 way connector.
Release the outer ends of the flexible pipes and unscrew them from the wheel cylinders.
Remove the brake drums, hubs, brake backing plates and stub axles.
No comments:
Post a Comment
Please sign your comments with your name and email address. Generally I do not publish anonymous comments and cannot reply if you do not give me a clue as to who you are!
Thanks very much for your comment.